Step by step creation guide: Wooden paper towel holder for newbies


Carpentry is a skill that has been practiced for centuries, allowing individuals to create beautiful and functional wooden pieces. For beginners who are just starting out in the world of carpentry, it can be overwhelming to know where to begin. In this step-by-step creation guide, we will walk you through the process of making a wooden paper towel holder, perfect for newbies to practice their woodworking skills.

Materials Needed

Before we dive into the step-by-step process, let’s gather all the materials you will need to create your wooden paper towel holder:

  • Wood: Choose a sturdy and durable wood such as oak, maple, or walnut. You will need a piece that is at least 1 inch thick and 6 inches wide.
  • Measuring tape
  • Pencil
  • Saw: A hand saw or a circular saw will work for this project.
  • Sandpaper: Get a variety of grits, ranging from coarse to fine.
  • Wood glue
  • Clamps
  • Drill
  • Forstner bit: Choose a bit that matches the diameter of your paper towel holder rod.
  • Wood finish: You can choose between paint, stain, or varnish to finish your paper towel holder.
  • Brushes or rags for applying the finish

Step 1: Measure and Mark

Start by measuring and marking the dimensions of your paper towel holder on the wood. You will need to cut two pieces for the base and the upright support. The base should be around 6 inches long and 6 inches wide, while the upright support should be around 12 inches long and 2 inches wide.

See also  Create a Chic and Inviting Atmosphere with Home Bar Wall Decor

Use a measuring tape and a pencil to make accurate marks on the wood. Double-check your measurements before moving on to the next step.

Step 2: Cut the Wood

Using a saw, carefully cut along the marked lines to separate the pieces of wood. Take your time and make sure to follow the lines accurately for clean and precise cuts. If you are using a circular saw, be sure to wear safety goggles and follow all safety precautions.

Step 3: Sand the Wood

Once the pieces of wood are cut, it’s time to smooth out any rough edges and surfaces. Start with a coarse grit sandpaper and gradually work your way up to a finer grit. Sand in the direction of the wood grain to avoid scratching the surface.

Be sure to sand all sides of the wood, including the edges and corners. This will give your paper towel holder a polished and professional look.

Step 4: Assemble the Base

Apply a thin layer of wood glue to one of the long edges of the base piece. Align the edges with the corresponding edge of the upright support piece and press them together firmly. Use clamps to hold the pieces in place while the glue dries.

Make sure the pieces are aligned properly and square. Wipe off any excess glue with a damp cloth. Allow the glue to dry completely according to the manufacturer’s instructions.

Step 5: Drill Holes

Using a drill and a Forstner bit, drill a hole in the center of the upright support piece. The diameter of the hole should match the diameter of your paper towel holder rod. This hole will hold the rod in place.

See also  Top Efficient and Stylish Approaches for Closet Organization

Make sure to drill the hole straight and at a 90-degree angle to the wood surface. Use a depth stop on your drill to ensure that you don’t drill too deep.

Step 6: Apply Finish

Now that the basic structure of your paper towel holder is complete, it’s time to apply the finish. You can choose to paint, stain, or varnish the wood, depending on the look you want to achieve.

Apply the finish evenly using a brush or a rag, following the manufacturer’s instructions. Allow the finish to dry completely before moving on to the next step.

Step 7: Insert the Paper Towel Rod

Once the finish is dry, insert the paper towel rod into the hole you drilled in the upright support piece. The rod should fit snugly and securely.

If the rod is too loose, you can add a small amount of wood glue to the hole before inserting the rod. Wipe off any excess glue and allow it to dry completely.

Step 8: Enjoy Your Wooden Paper Towel Holder

Congratulations! You have successfully created a wooden paper towel holder from scratch. Place your paper towel roll on the rod and enjoy the convenience and beauty of your handmade creation.


Carpentry is a rewarding hobby that allows individuals to create functional and aesthetically pleasing wooden pieces. By following this step-by-step creation guide, beginners can practice their woodworking skills and create a wooden paper towel holder. Remember to gather all the necessary materials, measure and cut the wood accurately, sand the surfaces, assemble the pieces, drill the necessary holes, apply the finish, and insert the paper towel rod. With a little patience and practice, you can create beautiful wooden pieces that will enhance your home decor.

See also  Cultivating Lush Flowerbeds: Essential Tips for Fertilizing Houseplants

Frequently Asked Questions

  1. Can I use a different type of wood for this project?
    Yes, you can use any type of wood that is sturdy and durable. However, keep in mind that different woods have different characteristics, such as grain patterns and hardness, which may affect the overall look and feel of your paper towel holder.
  2. Do I need to have prior carpentry experience to make this paper towel holder?
    No, this project is designed for beginners and does not require any prior carpentry experience. However, it’s always helpful to familiarize yourself with basic woodworking tools and techniques before starting any project.
  3. Can I customize the dimensions of the paper towel holder?
    Absolutely! Feel free to adjust the dimensions of the base and upright support to fit your specific needs and preferences. Just make sure to maintain the overall stability and functionality of the holder.
  4. What other woodworking projects can I try as a beginner?
    As a beginner, there are many simple and fun woodworking projects you can try, such as a cutting board, a picture frame, or a small shelf. Start with small projects and gradually work your way up to more complex ones as you gain confidence and skill.
Julia Snown

A seasoned home enthusiast and garden lover, Julia believes that everyone's abode should be their personal paradise. At EverydayGardenHomes, she shares daily inspirations to transform your space into a haven of tranquillity and beauty, one day at a time.

A seasoned home enthusiast and garden lover, Julia believes that everyone’s abode should be their personal paradise. At EverydayGardenHomes, she shares daily inspirations to transform your space into a haven of tranquillity and beauty, one day at a time.

Leave a Comment